Our GPR surveys provide a fast and efficient NDT means of surveying large areas of concrete floor slab to determine construction detail and help identify possible defects. Suitable for warehouses, offices, car parks, etc.
Why undertake a GPR floor slab survey?
Typically, GPR floor slab surveys are undertaken to determine or confirm the following:
Floor slab construction detail
Adequate mesh overlap
Detect variations in floor slab construction detail
Determine the position of any ground beams and pile caps
A GPR floor slab may be required for several reasons:
Determine construction detail
Verify construction drawings
Identify the reason for slab failure
Advantages of a GPR floor slab survey
GPR offers several clear advantages over more traditional survey methods. As it detects changes in the sub-surface, it will detect not only reinforcement, but also any voiding beneath the slab, the slab thickness, construction layers, variations in construction, services (including plastic) etc.
The GPR is non-intrusive and can be carried out in occupied premises with minimal disruption. It is suitable for scanning large or small local areas. The on-site scanning is quick and efficient. The data is saved electronically and processing and interpretation is typically carried out off-site.
Find out more about how GPR works on our Ground Penetrating Radar page.
The GPR survey involves scanning the required area of floor slab with a series of scan lines; typically, these are on a regular orthogonal grid, but can be varied to accommodate obstructions.
For office, warehouse or any other floor slab survey, we use a GSSI SIR-3000/4000, dual frequency or a multi-channel GPR system. The dual frequency scans provide a greater depth range with a better resolution than a single frequency antenna. Multi-channel systems use an array of antennas, providing rapid scanning of large open areas.
Antenna central frequency is typically in the range 1.5GHz to 300MHz. We frequently scan using several different frequencies to obtain a range of depths and resolutions. The 1.5GHz antenna would typically penetrate to a depth of 400mm in concrete and is best for detecting shallow features such as layers of reinforcement, while the 300MHz antenna can penetrate to a depth of 2m or more (conditions permitting), thus resolving deeper features, albeit with a loss in resolution in the data.
All site survey data is saved electronically. Typically, the data is then processed and interpreted off-site at our offices. This means data collection on site is quick and efficient, keeping any disruption of occupied premises to a minimum.
Typically, our GPR surveyors will scan the required area of slab with scan lines at appropriate centres. All data is saved electronically and processed off-site. Our results and interpretation is presented in a clear report, including CAD drawings, sketches, photographs and annotated radargrams as required.
GPR rebar imaging - depth slice showing schematic representation of top reinforcement distribution in basement car park slab.
Contact us to find out more about GPR concrete floor slab surveys and how we can help you:
Telephone: 0207 565 7056
The following information sheets are relevant to concrete floor slab surveys: