Our non-intrusive GPR surveys can provide thickness readings for concrete slabs, screeds, walls, road construction, etc. Variations in thickness and construction detail can also be detected. Typically, only one-sided access is required.
Traditionally, thickness is determined by direct measurement; however, this requires access to both sides. One solution would be to drill through and then measure the thickness, but this is not always possible (listed building, party wall or you simply don’t want to damage cosmetic finishes).
Ground Penetrating Radar (GPR) offers a solution to this problem. It is suitable for most (non-metallic) materials and can even determine the thickness of several layers of construction simultaneously e.g. asphalt layers in road construction, thickness of screed and underlying concrete slab, etc. GPR is particularly useful for the following:
GPR scans continuously record thickness information along a scan line; therefore, effectively providing a cross section through the substrate. This makes the GPR especially suitable for detecting variations in thickness.
An additional benefit of using GPR, is that other information can be collected at the same time, such as reinforcement distribution, depth of cover to rebar, delamination between layers, voids, etc.
Sandberg offer GPR surveys to determine thickness of construction. Our experienced surveyors can undertake anything from simple spot readings to extensive and comprehensive surveys of large areas to determine thickness of construction and variations in thickness. Advantages of using GPR include:
GPR can be used for screed and concrete slab thickness surveys. It is very quick and efficient and suitable for small or large areas, e.g. offices, warehouses and car parks. It can be used to confirm if thicknesses are within specified tolerances, or determine the minimum/maximum thickness of a concrete slab for structural analysis.
Small areas can be scanned with individual scan lines as required, while larger areas are typically scanned on a regular orthogonal grid.
Physical measurement of wall thicknesses can often be very difficult if not impossible. Party walls are a good example of this.
GPR offers a quick and effective non-intrusive survey method of determining the thickness of walls. It is suitable for both concrete and solid masonry. GPR will also detect any wall protrusions, columns and chimney breasts on the other side of the wall. Results can be marked onto CAD drawings or annotated on radargrams showing a pseudo section view of the surveyed wall.
Results can be marked onto CAD drawings as spot readings, contour plots or colour coded thickness zones along scan-lines.
Contact us to find out more about our GPR wall and slab thickness measurement surveys and how we can help you:
Telephone: 0207 565 7056